Aerial Work Platforms …
HLA range - High Level…
S 90 HLA - Working Hei…
Aerial Work Platforms and Insulator Washers
Bronto Skylift Oy Ab Teerivuorenkatu 28 FIN-33300 TAMPERE Finland Tel. +358 3 2727 111 Fax +358 3 2727 300 Spare parts +358 3 2727 444 Email sales@bronto.fi spares@bronto.fi servicehelp@bronto.fi www.bronto.fi Bronto Skylift AB Effektvägen 14 S-196 37 KUNGSÄNGEN Sweden Tel. +46 8 5816 6040 Fax +46 8 5816 6035 www.bronto.se Bronto Skylift AG Ifangstrasse 111 CH-8153 RÜMLANG Switzerland Tel. +41 1 818 8040 Fax +41 1 818 8050 www.bronto.ch Bronto Skylift GmbH Schulzendorfer Str. 158 D-13503 BERLIN Germany Tel. +49 172 31 73 535 Fax +49 30 43 66 94 51 Bronto – heading upwards, with its feet firmly on the ground. Non-insulated and Insulated AERIAL WORK PLATFORMS AND INSULATOR WASHERS for electric utilities
For over 40 years, operators have trusted Bronto Skylift to provide a safer way to access overhead areas. To date, Bronto has built over 4,500 aerial devices, including the world's tallest insulated and non-insulated truckmounted models. Today, Bronto Skylift work platforms are used in utility, petrochemical, construction and industrial markets worldwide. • Well over 10 insulated and non-insulated models • Working heights to 72 m • Horizontal outreach to 31,3 m • Platform capacities to 680 kg Better access to overhead areas Each Bronto Skylift product is built for operator convenience, dependable performance, increased safety and reduced maintenance. It features proportional controls to smoothly place the platform precisely where it is needed. Each Bronto Skylift consists of boom sections built to accuracies of 0,1 mm providing increased stability and smoother boom extension and retraction. More compactness Bronto Skylift aerials are designed for better overthe-road transportation and improved jobsite accessibility. In many cases, Bronto Skylift aerials are up to 20% shorter in overall length and 20% lighter in gross vehicle weight than comparable products. More versatility With working heights to 72 m, horizontal outreach to 31,3 m and up to 680 kg platform capacities on some models, Bronto Skylift aerials can reach more places in more overhead locations than any other product available. More maneuverability Bronto Skylift aerials are available with 6x4, 6x6, 8x4, 8x6, and 8x8 drive configurations with optional rear steer axles that provide a turning radius as short as 12 m. Optional interlock differentials and no-spin axle assemblies are also available. More productivity For rapid deployment, Bronto Skylift offers automatic self-leveling outriggers that level the unit in less than 30 seconds at the touch of a button. During operation, all boom sections extend and retract simultaneously, enabling the boom to be raised or lowered faster. More convenience The unique telescoping design of Bronto Skylift aerials require only 8,5 m over-head clearance to set up. Outriggers can also be fully deployed on one side only and the unit can be operated in a reduced work envelope in confined areas. Bronto Skylifts have a primary and back-up safety device for outreach limitation, boom rotation, platform leveling and all other critical operating functions. They have been designed and built to meet the requirements of a wide variety of commercial-type chassis, enabling easier repair and maintenance with standard parts. Optional features A wide variety of options and accessories are available, including hydraulic, air or electrical powered tools, hydraulic material handler and other productivity-enhancing features. Optional chassis In addition to standard wheel-driven chassis configurations, Bronto Skylift work platforms can also be mounted on a track-driven undercarriage or crane chassis for greater access to difficult terrain. Check out Bronto Skylift Aerial Work Platforms today.
Non-insulated models The Bronto Skylift aerial work platform with standard steel boom construction combines compactness, versatility, convenience, maneuverability and productivity in a single package. It provides unparalleled access to any overhead area. All Bronto Skylift work platforms feature a multi-section telescopic main boom and articulated platform boom. On larger models, the platform boom also telescopes for additional horizontal reach, enabling operation in congested areas. It also enhances safety Platform rotation Bronto Skylift aerials feature a standard platform rotation of 80-degrees left to 80-degrees right (insulated units 60º left, 60º right), which enables the operator to boom up to the overhead work area, and rotate the platform so that the work area is directly in front of the platform. and increases utilization because one machine can be used to access a wider range of working areas from a single location. Due to the telescoping main boom and articulating platform boom, it also reaches below grade areas for greater versatility. Control stations Identical control stations on the turntable and platform feature electro-hydraulic controls with proportional control valves. The turntable control station provides precise line-of-sight operation at any elevation in full 360-degree rotation. Shortjacking capability All Bronto Skylift aerials can be "short jacked" with outriggers fully deployed on one side only, and safely operated in restricted work areas with no loss of platform capacity or side reach capabilities. This enables set-up and operation in confined areas and reduces the need to close traffic lanes when working alongside highways.
Insulated models Bronto Skylift SI Series aerials feature insulated platform booms and are designed for access to up to 500kV sub-transmission and transmission lines. The heavy-duty telescopic machines enable bare-hand maintenance, inspection and repairs while the system is still energized. Live-line working capability is enabled through a fiber optic control system running inside an appr. 5 m long filament-wound fiberglass boom. The high strength FRP boom features boom tip deflection of less than 5 cm /500 kg of applied load. Its sealed design prevents internal contamination. Leakage detecter Boom Leakage Detector indicates the actual current experienced by the platform personnel and FRP boom. Although ANSI and IEC standards allow up to 1.0µA/kV line-to-ground current leakage, Bronto SI Series units typically exhibit a maximum current leakage of less than 0.2 µA/kV. Desiccants inside the boom control internal atmospheric humidity. A sharp-edge corona ring around the boom provides consistent voltage gradient along the length of the boom. A separate fiber optic intercom system provides audio communications between the platform and turntable control station. Remote control Optional radio remote control system enables the operator to position the platform onto the energized conductor from the ground, enabling a better view of the platform’s position while completely isolating the operator from the vehicle. Corona ring A sharp edge corona ring provides a consistent voltage gradient along the length of the FRP boom and acts as an electrical stress relief device at the upper section by preventing potentially damaging positive corona activity on or near the FRP boom surface.
Insulator Bronto Skylift aerial devices are user friendly and reliable, and have been designed with comprehensive safety features for improved operation and efficiency. In addition to the conventional repair and maintenance tasks of overhead lines, utility companies are often confronted with other problems as well. Transmission and distribution line insulators are frequently contaminated with salt, dust, industrial pollution, bird droppings and so forth. Contamination can create a conductive path on the surface of the insulator, causing "flash over", which can result in expensive power interruptions and damage. To reduce "flash over", many utility companies have successfully implemented preventive insulator washing programs with conventional live-line insulator washing equipment. All insulated and non-insulated Bronto Skylift aerial devices can be fitted with integrated insulator washing capability resulting in a real multipurpose vehicle with several capabilities - live-line bare hand work - general maintenance and repair work - live-line insulator washing thus considerably reducing down time and increasing efficiency. washers Remotely controlled washing head integrated into an aerial device The HDW Range is designed for washing from the ground or from the pole structure. The universal design allows mounting onto most commercially available all wheel drive chassis. The ALR Range combines insulator washing capability upto appr. 25 m with general line maintenance capability thus considerably reducing the downtime of the machine and the crew. 75m 70 65 60 55 50 45 40 35 30 25 20 15 10 5 0 5 10 15 Non-insulated units S 34 MDT S 38 HDT S 44 HDT S 55 HDT S 68 HLA Max. working height Max. working outreach Max. safe working load Transportation height, approx. Transportation length, approx. GVW Insulated units (SI Range) Max. working height Max. working outreach Max. safe working load Transportation height, approx. Transportation length, approx. GVW Insulator washers Tank capacity Chassis configuration Hose reels Spray guns Max. nominal washing height, approx. Transport height, approx. Transport length, approx. 34 m 24,7 m 3,7 m 9,5 m 18000 kg 38 m 23,4 m 3,8 m 11,7 m 26000 kg S 38 HDT ER 38 m 31,3 m 3,9 m 11,7 m 32000 kg 44 m 22,6 m 3,9 m 11,8 m 26000 kg S 44 HDT ER 44 m 29,7 m 4,0 m 11,8 m 32000 kg 55 m 24,0 m 280/180 kg 440/200 kg 440/200 kg 440/200 kg 440/200 kg 440/200 kg SI 125 HDT SI 155 HDT SI 178 HDT SI 197 HDT 37,8 m 24,5 m 450 kg 4,0 m 11,8 m 30000 kg SE 6 HDW 6000 l 4x4 2 2 N/A 3,4 m 7,5 m 47,2 m 21,5 m 680 kg 4,0 m 13,5 m 32500 kg SE 10 HDW 10000 l 6x6 2 2 N/A 3,4 m 8,4 m SE 18 HDW 18000 l 8x8 2 2 N/A 3,6 m 8,6 m 54,2 m 22,0 m 450 kg 4,0 m 13,5 m 32500 kg 60 m 23,0 m 450 kg 4,05 m 14,4 m 35000 kg Note! All insulated and non-insulated units are available with integrated insulator washing system. Non-insulated Insulated ft 10090 80 70 60 50 40 30 20 10 0 10 S 72 HLA S 68 HLA S 34 MDT 20 35m 30 25 20 15 10 5 0 360° 5 ft 240 230 220 210 200 190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 100 90 80 70 60 50 40 30 20 10 0 10 ft 60m 190 S 55 HDT S 44 HDT ER S 44 HDT 180 55 S 38 HDT ER S 38 HDT 170 50 45 40 35 30 25 20 15 10 5 0 5 SE 17/6 HDW 6000 l 6x6 160 150 140 130 120 110 100 30 10m 35m 25 30 20 15 10 5 0 5m 2 2 17 m 4 m 10 m SE 19/6 HDW 10000 l 6x6 90 80 70 60 50 40 30 20 10 0 10 20 2 2 19 m 4 m 10 m 50 40 35 30 25 20 15 10 5 0 5 4,0 m 12,8 m 32000 kg 68 m 25,9 m 440 kg 4,0 m 14,0 m 44000 kg S 72 HLA 72 m 27,5 m 440 kg 4,0 m 15,0 m 46000 kg 100 90 80 70 60 50 40 30 20 10 0 10 60m ft SI 197 HDT 190 SI 178 HDT SI 155 HDT 55 SI 125 HDT 180 45 SE 21/18 HDW 18000 l 8x8 2 2 21 m 4 m 10 m SE 18/6 ALR 6000 l 6x6 2 2+1 21 m 4 m 12 m SE 20/10 ALR 10000 l 6x6 30m 25 20 15 10 5 0 5 2 2+1 23 m 4 m 12 m SE 22/18 ALR 18000 l 8x8 2 2+1 25 m 4 m 12 m 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 10 20
HLA range - High Level Articulated
Bangkok Brasilia ISO 9001 ISO 14001 EN 729-2 HIGH CERTIFIED ORGANISATION Max. working height Max. working outreach Technical data Safe working load Cairo Max. up-andover capacity Water capacity Transportation height, approx. F 69 HLA 69 m 29,5 m 400 kg 24,0 m 3800 l/min 3,9 m F 78 HLA 78 m 29,5 m 400 kg 24,0 m 3800 l/min 3,9 m F 88 HLA 87 m 29,5 m 400 kg 24,0 m 3800 l/min 3,9 m F 90 HLA 90 m 29,5 m 400 kg 24,0 m 3800 l/min 3,9 m F 101 HLA 101 m 23,5 m 400 kg 20,0 m 3800 l/min 3,9 m BRONTO SKYLIFT OY AB Teerivuorenkatu 28 FIN-33300 TAMPERE Finland Tel +358 3 272 7111 Fax +358 3 272 7300 www.bronto.fi BRONTO SKYLIFT AB Effektvägen 14 S-19637 KUNGSÄNGEN Sweden Tel +46 8 5816 6040 Fax +46 8 5816 6035 www.bronto.se BRONTO SKYLIFT AG Ifangstrasse 111 CH-8153 RÜMLANG Switzerland Tel +41 1 818 8040 Fax +41 1 818 8050 www.bronto.ch BRONTO SKYLIFT GMBH Im Lehrer Feld 9 D-89081 Ulm / Donau Germany Tel +49 731 1899 7880 Fax +49 731 1899 78850 www.bronto-skylift.de Athens Taipei A subsidiary of Federal Signal Corporation LEVEL ARTICULATED Bronto Skylift - Above All HLA range HLA
Bronto Skylift, the Market Leader by Experience: over 5000 aerial appliances in operation all over the world by Variety: over 30 different models with working heights from 16 to over 100 meters by Technology: the best weight-height ratio based on advanced plasma welding methods by Operational Versatility: high degree of customization, over 2000 optional features available Bronto Skylift’s HLA Range represents the ultimate in high rise rescue and fi re fi ghting capability. This range includes the highest truck-mounted aerial platform in the world: the F 101 HLA with the working height of over 100 meters. Superior vertical and horizontal outreach at all heights, fast and safe operations and integrated corrosion-resistant waterway are the main advantages of the HLA range. Built on a standard truck chassis it remains fl exible and compact and can reach emergency sites using ordinary roads and streets. With the HLA range autojacking function, the unit is fully stabilized for rescue in just 40 seconds and the rescue proceeds quickly from the height of 33 fl oors. Bronto Skylift HLA units are at best in major metropolitan cities. More than 100 HLA units have been delivered around the world in cities like Bangkok, Brasilia, Buenos Aires, Cairo, Moscow, Taipei etc. WORKING HEIGHTS FROM 69 TO OVER 100 METERS HLA units are purpose-designed for rescue and fi re fi ghting with integrated waterway. With the easy automatic levelling function the unit is fully stabilized for rescue in 40 seconds. Combined horizontal and vertical reach. T h e u l t i m a t e r e a c h Features HLA units are available on all major commercial chassis with standard cab. Predesigned for alternative means of rescue. HLA range
S 90 HLA - Working Height 90 Meters
WORKING HEIGHT 90 METERSS 90 Bronto Skylift - Above All S 90 HLA HLA
Max. working height S 90 HLA The Bronto Skylift S 90 HLA is the newest member of the famous HLA range of Bronto Skylift and the highest truck mounted aerial platform on the market. The HLA stands for High Level Articulated and represents the ultimate in high rise access. Bronto Skylift S 90 HLA has Bronto+ electronic control system. The control centers have full colour displays with excellent visibility. Max. working outreach Safe working load Transportation height, approx. Transportation length, approx. GVW S 90 HLA 90 m 33 m 440 kg 4,0 m 15,0 m 47900 kg Excellent manoeuvrability and drivability - Mountable onto a standard 4-axle truck with added trailing axle - Comparably short overall length of only 15 meters - Steered trailing axle - Reasonably short front and rear overhang - Excellent approach angles in the front and rear - GVW below 48 tonnes Fast and convenient operation - H-type outriggers in the front and rear for minimum set-up space requirement - Permanently fi xed footplates, no manual adjustment needed - One button automatic levelling with remote control ISO 9001 ISO 14001 EN 729-2 CERTIFIED ORGANISATION BRONTO SKYLIFT OY AB Teerivuorenkatu 28 FIN-33300 TAMPERE Finland Tel +358 3 272 7111 Fax +358 3 272 7300 www.bronto.fi - Excellent levelling capacity - Bronto+ control system with variable cage load, operational information, fault fi nding capabilities, colour displays, etc. Maximum work effi ciency and return on investment - Best height / weight (GVW) ratio on the market - Economical chassis (no lowering of the cabin needed) - Enormous outreach even at big heights, e.g. 30 meters at 60 meters height - Fast movements due to a generously dimensioned hydraulic system - High cage load of 440 kg unrestricted at any height - Optional one-sided jacking available - Fault fi nding and remote diagnostics systems available - Available on all major commercial chassis with standard cab Combined horizontal and vertical reach. HLA units are available on all major commercial chassis with standard cab. BRONTO SKYLIFT AB Effektvägen 14 S-19637 KUNGSÄNGEN Sweden Tel +46 8 5816 6040 Fax +46 8 5816 6035 www.bronto.se BRONTO SKYLIFT AG Ifangstrasse 111 CH-8153 RÜMLANG Switzerland Tel +41 1 818 8040 Fax +41 1 818 8050 www.bronto.ch S 90 HLA BRONTO SKYLIFT GMBH Ralf Niederberger Lanker Strasse 13 D-47809 Krefeld Germany Tel +49 2151 521324 Fax + 49 2151 571562 A subsidiary of Federal Signal Corporation
PubliCo Oy, Pälkäneentie 19 A, FI-00510 Helsinki, Finland